KIA Forte / Cerato (2009-2013) fuses

Advertisements

 

In this article, we consider the first-generation KIA Forte (second generation Cerato), produced from 2009 to 2013. Here you will find fuse box diagrams of KIA Forte / Cerato 2009, 2010, 2011, 2012 and 2013, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Fuse Layout KIA Forte / Cerato 2009-2013

 

Cigar lighter (power outlet) fuses in the KIA Forte / Cerato are located in the Instrument panel fuse box (see fuses “P/OUTLET”).

Instrument panel fuse box

Fuse box location

It is located behind the cover on the driver’s side of the instrument panel.The location of the fuses in the passenger compartment: KIA Forte / Cerato (2009-2013)

Left-hand drive vehicles

Right-hand drive vehicles

Inside the fuse/relay panel covers, you can find the label describing fuse/relay name and capacity. Not all fuse panel descriptions in this manual may be applicable to your vehicle.

Advertisements

Assignment of the fuses in the Instrument panel

NameAmp ratingProtected component
START10ATransaxle Range Switch (A/T), Ignition Lock Switch (M/T), E/R Fuse & Relay Box (Start Relay)
A/CON SW10AA/C Control Module (Auto A/C), PCM
MIRR. HTD10ADriver/ Passenger Power Outside Mirror (Defogger), A/C Control Module (Rear Defogger SW)
S/HTR15AFront Seat Warmer LH/RH
A/CON10AE/R Fuse & Relay Box (Blower Relay), BCM, Incar Temperature Sensor (Auto), Sunroof Control Module, A/C Control Module
HEAD LAMP10AE/R Fuse & Relay Box (H/LP (HI/LO) Relay), DRL Control Module
WIPER (FR)25AMultifunction Switch (Wiper & Washer SW), E/R Fuse & Relay Box (Wiper Relay), Front Wiper Motor
DRL15ADRL Control Module
FOG LP (RR)15A-
P/WDW DR25APower Window Main Switch, Rear Power Window Switch LH
D/CLOCK10AAudio, BCM, Clock, Power Outside Mirror Switch
P/OUTLET15APower Outlet
DR LOCK20ASunroof Control Module, ICM Relay Box (Door Lock/Unlock Relay, Two Turn Unlock Relay)
DEICER15AICM Relay Box (Windshield Defogger Relay)
STOP LP15AStop Lamp Switch, Sport Mode Switch, Key Solenoid
POWER CONNECTOR: ROOM LP15ATrunk Room Lamp, BCM, Clock, Instrument Cluster (IND.), Data Link Connector, A/C Control Module, Ignition Key III. & Door Warning Switch, Room Lamp, Map Lamp
POWER CONNECTOR: AUDIO15AAudio
TRUNK OPEN15ATrunk Open Relay
PDM25A-
SAFETY P/WDW25A-
P/WDW ASS25APower Window Main Switch, Passenger Power Window Switch, Rear Power Window Switch RH
P/OUTLET15APower Outlet
T/SIG LP10AHazard Switch
A/BAG IND10AInstrument Cluster (IND.)
CLUSTER10AInstrument Cluster (IND.), BCM, Electronic Chromic Mirror, Rheostat, Steering Angle Sensor
A/BAG15ASRS Control Module
IGN1-A15APDM, EPMESC Switch, EPS Control Module Control Module
HAZARD LP15AICM Relay Box (Hazard Relay), Hazard Switch
TAIL LP (RH)10ARear Combination Lamp (In/Out) RH, Head Lamp RH, Shunt Connector, Passenger Power Window Switch, License Lamp RH (4DR), Illuminations, Rheostat Relay (With DRL)
TAIL LP (LH)10AHead Lamp LH, Rear Combination Lamp (In/Out) LH, Power Window Main Switch, License Lamp (2DR), License Lamp LH (4DR)

Engine compartment fuse box

Fuse box location

The location of the fuses in the engine compartment: KIA Forte / Cerato (2009-2013)

Inside the fuse/relay panel covers, you can find the label describing fuse/relay name and capacity. Not all fuse panel descriptions in this manual may be applicable to your vehicle.

Advertisements

Assignment of the fuses in the Engine compartment

DescriptionAmp ratingProtected component
MULTI FUSES:
ALT125AGenerator, Fuse (MDPS, HTD GLASS, C/FAN, ABS 2, BLOWER, IGN 1, FOG LP (FR), ABS 1)
MDPS80AEPS Control Module
ABS 240AESC Control Module, ABS Control Module
C/FAN40AC/Fan LO/HI Relay
BLOWER40ABlower Relay
HTD GLASS40AI/P Junction Box (Rear Defogger Relay)
IGN 230AIgnition Switch, Start Relay, Button Relay Box (ESCL Relay)
BATT 150AI/P Junction Box (Fuse (TAIL LAMP (LH/RH), P/WDW DR, P/WDW ASS, FOG LP (RRJ/SSB, SMK, PDM), Tail Lamp Relay, Power Window Relay)
FUSES:
ABS 140AESC Control Module, ABS Control Module
IGN 130AIgnition Switch, Button Relay Box (ESCL Relay (IGN 1))
BATT 250AI/P Junction Box (Power Connector (AUDIO, ROOM LP LAMP), FUSE (STOP LP, DEICER, HAZARD LP, DR LOCK, TRUNK OPEN))
ECU30AEngine Control Relay
FOG LP (FR)10AMultipurpose Check Connector, Front Fog Relay, Battery Sensor
H/LP HI20AH/LP (HI) Relay,
HORN10AHorn Relay
H/LP LO(LH)10AHead Lamp LH
H/LP LO(RH)10AHead Lamp RH
SPARE10A-
SNSR 310AECM, PCM, Vehicle Speed Sensor, Pulse Generator 'A', Stop Lamp Switch
ABS10AMultipurpose Check Connector, ESC Control Module, ABS Control Module
ECU 315AIgnition Coil (#1 —#4), Condenser, PCM
B/UP LP10AInhibitor Switch, Pulse Generater 'B', Back Up Lamp Switch
SPARE15A-
SPARE20A-
IGN COIL20ACondenser (G4KF), Ignition Coil #1~4
SNSR 210AOil Control Valve (#1, #2), Camshaft Position Sensor (Intake, Exhaust), F/PUMP Relay, C/FAN LO Relay, Immobilizer Module
ECU 210APCM, Purge Control Solenoid Valve, Oxygen Sensor (Down)
INJECTOR10AA/CON Relay, Crankshaft Position Sensor, Oxygen Sensor (UP), Injector #1~4, Variable Intake Sensor
SNSR 115APCM, Canister Close Valve
ECU 110APCM
A/CON10AA/CON Relay
F/PUMP15AF/FUMP Relay

Advertisements